Pinouts >  Point Of Sale Devices: scanners, printers, cash registers cables and connectors  >  Costar pinouts
6 pin RJ12 (6P6C) male connector layout
6 pin RJ12 (6P6C) male connector
at the LabelWriter
Used on the DYMO/CoStar LabelWriter thermal printers that connect through RS-232.
LabelWriter Pin
Name		 LabelWriter Pin
Number		 Direction computer Pin
Number		 computer Pin
Name		 Description
CTS 1 --> 8 CTS Clear to send
TXD 2 <-- 3 TXD RS232 Transmit (to LabelWriter)
RXD 3 --> 2 RXD RS232 Receive (from LabelWriter)
GND 4 --- 5 GND Ground
RTS 5 <-- 7 RTS Request to send
DSR 6 --> 6 DSR Data set ready

This pinout comes from the cable that came with a CoStar LabelWriter XL Plus, tested with a multimeter. (It is likely that its the same one used for other LabelWriters made by CoStar and DYMO, but this is merely speculation.)

 

9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the computer
Pinout status: +3 -0
According to 3 reports in our database (3 positive and 0 negative) the CoStar/DYMO LabelWriter RS-232 Cable pinout should be correct.

Is this pinout
NO DIY devices
CoStar/DYMO LabelWriter RS-232 Cable visual pinout:click to enlarge
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings