Point Of Sale Devices: scanners, printers, cash registers cables and connectors  > Wincor pinouts
This cable breaks out the "PS/2" connector inside the display housing into a serial cable and a 12VDC power supply. Also make sure you ground the shells together to provide a ground for the TxD signal path.


Device 1
Pin Number
Device 1
Pin Name
Direction Device 2
Pin Number
Device 2
Pin Name
1 N/C =/=      
2 N/C =/=      
3 GND =>   GND to PSU -
4 TxD => 3 TxD to RS232 DE9 pin3
5 N/C =/=      
6 12VDC =>   +12VDC to PSU +


6 pin mini-DIN male (PS/2 STYLE) connector layout
6 pin mini-DIN male (PS/2 STYLE) connector
9 pin D-SUB female connector layout
9 pin D-SUB female connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Wincor Nixdorf BA63 BA66 pole display visual pinout:
Wincor Nixdorf BA63 BA66 pole display diagram
click to enlarge
Source(s) of this and additional information: http://lcdhype.condense.de/index.php?showtopic=21
This page contain parts under Copyright © 2000-2018 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinoutguide.com . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.