Pinouts >  Digital cameras and camcorders interfaces  >  Canon pinouts
3 pin stereo plug connector layout
3 pin stereo plug connector
at the 2.5 mm plug at the camera cable
The external trigger can be accessed with a standard 3-pole 2.5 mm jack plug. Appropriate 'official' remote controller with this plug is called RS-60 E3 or COS-60E3. The same pinout is used by all Pentax cameras
The pinout should fit 45 devices/models. Click to list>


 

Pin
Number		 Pin
Name		 Description
3 GND Ground
2 FOCUS short to pin 3 to focus Canon camera
1 SHUTTER short to pin 3 to trigger shutter Canon camera


 

Pinout status: +2 -0
According to 2 reports in our database (2 positive and 0 negative) the Canon 350D, 400D, 450D, 500D, 550D, 60D, Pentax manual shutter/focus control pinout should be correct.

Is this pinout
1 DIY device(s)
Canon 350D, 400D, 450D, 500D, 550D, 60D, Pentax manual shutter/focus control visual pinout:click to enlarge
Source(s) of this and additional information: http://www.doc-diy.net/photo/remote_pinout/
Copyright © 2000-2025 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings