A serial cable is a cable used to transfer information between two devices using a serial communication protocol. The form of connectors depends on the particular serial port used. A cable wired for connecting two DTEs directly is known as a null modem cable.
or follow to 32 OLD hardware pinouts.
or follow to 32 OLD hardware pinouts.
- Modem cables This cable should be used for DTE to DCE (for instance computer to modem) connections with hardware handshaking.
- Nullmodem adapter This adapter will enable you to use a normal serial cable as a nullmodem
- RS-232 serial cable DE-9 to DE-9, DE-9 to DE-25 cables. Use this cable to connect two devices equipped with serial RS-232 interface. This cable may be used to connect any RS-232 equipped device to computer, connect two computers via COM serial port and so on. RS232 cable colors included.
- Serial (9 pin) port Loopback this adapter is used for diagnostic of rs-232 de-9 serial port
- Serial dsub9 to dsub25 adapter schematic This adapter will enable you to connect a 25 pin serialcable to a 9 pin connector at the computer
- Serial port Loopback (25 pin) Used to verify the port is functional.
- Serial Printer (9-25) cable Use this cable between computer (DTE) and printer (DTE) devices.
- Serial Printer (9-25) Epson cable For most of models Epson printers
- Smart card (Sim card) to PC adapter cable (sim reader/writer) schematic used to to connect computers to ISO 7816 compatible chip card systems (e.g. GSM mobile phones or pay-TV decoding systems)
- USB 2.0 cable wiring Very simple. Maximum length of cable is about 5 m for AWG20 and 0.8 m for AWG28 cable.
- USB-C (type-C) full-featured cable used for high-speed data transfer
- USB-C to USB 3.2 cable for high-speed connections
- V.35 crossover cable cable for wiring DCE with DCE or DTE with DTE devices
Cisco Pinouts
Cyclades Pinouts
- Cyclades terminal server crossover cable
- Some RS-232 connectors include Cyclades, Yost, MMJ and other
